Installation instructions

Instructions for LED mirror

1. Place the mirror on a stable, flat surface.
2. Clean, degrease, and dry the mirror surface where you will attach the hangers.
3. Remove the protective film from the adhesive of the metal hangers.
4. Attach the hangers to the dry and degreased mirror surface.
5. Note: The hangers will achieve 100% strength after 24 hours. Wait 24 hours before hanging the mirror in the final location.
6. Measure the distance between the centers of the previously attached hangers.
7. Mark the measured distance on the wall and drill holes in the marked places, then insert wall plugs.
8. Attach the hooks with the screws provided in the set.
9. Connect the power cables to the transformer.
10. Hang the mirror by sliding it gently from the top. Done!

Instructions for mirrors/mirrors with backing/print

1. Place the mirror in the chosen position (vertical or horizontal) on a stable, flat surface.
2. Clean, degrease, and dry the mirror surface where you will attach the hangers.
3. Remove the protective film from the adhesive of the metal hangers.
4. Attach the hangers to the dry and degreased mirror surface, maintaining an even distance (about 6 cm) from the edge of the mirror.
5. Note: The hangers will achieve 100% strength after 24 hours. Wait 24 hours before hanging the mirror in the final location.
6. Remove the protective film from the adhesive of the foam spacers.
7. Attach the spacers to the dry and degreased mirror surface, maintaining an even distance (about 6 cm) from the edge of the mirror.
8. Measure the distance between the centers of the previously attached hangers.
9. Mark the measured distance on the wall and drill holes in the marked places, then insert wall plugs.
10. Attach the hooks with the screws provided in the set.
11. Hang the mirror by sliding it gently from the top. Done!

Instructions for mirrors with MDF frame

How to prepare the mirror for mounting?
1. Place the mirror in the chosen position (vertical or horizontal) on a stable, flat surface.
2. Clean, degrease, and dry the mirror surface where you will attach the hangers.
3. Remove the protective film from the adhesive of the metal hangers.
4. Attach the hangers to the dry and degreased mirror surface, maintaining an even distance (about 6 cm) from the edge of the mirror.
5. Note: The hangers will achieve 100% strength after 24 hours. Wait 24 hours before hanging the mirror in the final location.
6. Measure the distance between the centers of the previously attached hangers.
7. Mark the measured distance on the wall and drill holes in the marked places, then insert wall plugs.
8. Attach the hooks with the screws provided in the set.
9. Hang the mirror by sliding it gently from the top. Done!